This kit replaces the bushing on a closing wheel arm with a bearing. It can be used on brand-new planters and on planters that already have some wear to the closing wheel arm. Having the closing wheel arms tight is critical ....

• Learn More

Needing a new bushing, bolt or washer for your Closing Wheel Frame Repair kit from RK products? Order it here! Match up parts from either your original installation diagram or use one of the versions we have uploaded here for convenience.

• Learn More

Improves performance by forcing the closing wheel to track properly. Primarily intended for use with cast closing wheels this kit will also reduce wheel bouncing noticeably. Three disc springs in series exert the required force to keep the closing wheel arm parallel to the end of the bearing housing...

• Learn More

One of these locator kits is needed for the Closing wheel arm repair kit on a 7200/7300 planter. It helps locate the bushing and can be used on multiple rows/planters...

• Learn More

New Copperhead Ag Single Bearing Gauge Wheel Arm We’ve replaced the gauge wheel arm bushing with a simple bearing and a stud that threads into the planter for ease of maintenance...

• Learn More

The gauge wheel arm pivot is the #1 wear point on planters. This is caused by the fact that the ground load on the gauge wheel is offset from the center of the row where the arm contacts the adjustable stop. This offset load is supported by two points of...

• Learn More

This scraper blade is available for each of the three main gauge wheel tire profiles. The blades are made from 3/16 heat treated steel and are mounted at about a 45 degree angle to the wheel. This allows the scraper to deflect mud outwards, away from the furrow and closing...

• Learn More

Needing new bushings or pivot pins?  Want to upgrade an outdated kit to the latest version?  Here is the spot!  All of the gauge wheel arm repair kit parts are here individually....

• Learn More

This Hardened Spring Steel clip bends over the gauge wheel arm where it pivots on the arm stop.  Over time, large divots wear into the gauge wheel arm in these locations, changing planting depth...

• Learn More

Replacement blades for the gauge wheel mud scrapers. This scraper blade is available for each of the three main gauge wheel tire profiles. The blades are made from 3/16 heat treated steel and are mounted at about a 45 degree angle to the wheel. This allows the scraper to deflect...

• Learn More

This is the replacement bushing for the 7000/7200, Kinze and White repair kit. You only need them if you have a threaded gauge wheel arm. You will likely need twice the quantity of bushings as row kits that you ordered. Example: a 12 row planter would need 24 bushings. PN:...

• Learn More

OEM seed tube guards typically wear down to 1/2″ by the end of an average season. The majority of the wear occurs early in the season. As the furrow becomes narrower planting depth decreases and becomes more erratic. The opener disks should be adjusted deeper to compensate. Increased compaction and...

• Learn More

This Hardened Spring Steel clip bends over the gauge wheel arm where it pivots on the arm stop.  Over time, large divots wear into the gauge wheel arm in these locations, changing planting depth.  Fill in any wear with weld or other product, grind it smooth and place a wear...

• Learn More

Improves performance by forcing the closing wheel to track properly. Primarily intended for use with cast closing wheels this kit will also reduce wheel bouncing noticeably. Three disc springs in series exert the required force to keep the closing wheel arm parallel to the end of the bearing housing. All...

• Learn More

Fertilizer Tube Attachment uses same nuts and bolts as guide to attach to guard...

• Learn More